Inkcut

Inkcut sends vector files straight to a cutter, with blade offset compensation that Inkscape exports lack.

Values to enter are in config/inkcut_profile.json.

1. Device > New. Name triaina Neptune 4.
2. Connection: choose file output and save the job to a file. The printer has no serial port for cut jobs (its USB-C is a console); run the file through the preprocessor and upload it as in Cutting a sticker.
3. Protocol: G-code. Header and footer from the profile.
4. Area: 225 x 225 mm.
5. Filters > Blade offset: 0.25 mm, cutoff 20 deg.
6. Speed: 1500 mm/min.

The preprocessor adds the CUTTER_MODE header that zeroes the heaters and applies the knife offset.