Inkcut profile¶
File: config/inkcut_profile.json
Inkcut stores devices in its own settings and has no stable import format, so this file is a reference: copy the values into Inkcut's device dialog. See Inkcut for where each field goes.
| Key | Value | Meaning |
|---|---|---|
connection.transport |
file |
Inkcut writes G-code to a file; upload it with mode_switch.py upload |
protocol |
gcode |
|
area |
225 x 225 mm | Neptune 4 bed |
blade.offset_mm |
0.25 |
Tip offset of a standard 45 deg Roland blade |
blade.cutoff_deg |
20 |
Corners sharper than this get a swivel move |
speeds.cut_feed_mm_min |
1500 |
Matches the preprocessor default cap |
gcode.header |
G21 G90 G28 CUTTER_MODE CUT_RETRACT |
|
gcode.footer |
CUT_RETRACT PRINTER_MODE |